Strip shape performance at tandem cold mill

冷连轧机的带材板形性能

• 批准号: ARC : LP0235491
• 负责人: A/Prof Anh Tieu
• 金额: $ 13.53万
• 依托单位: University of Wollongong
• 依托单位国家: 澳大利亚
• 项目类别: Linkage Projects
• 财政年份: 2002
• 资助国家: 澳大利亚
• 起止时间: 2002-01-01 至 2005-12-31
• 项目状态: 已结题
• 来源: https://researchdata.edu.au/strip-shape-performance-cold-mill/63882
• 关键词: Strip; shape; performance; tandem; cold

Strip shape performance at tandem cold mill. The shape of the strip at the cold mill are affected significantly by machine conditions and key process variables, and yet the inter-relationship between these key areas are not known and operators rely on trial-and-error methods to operate the mill. At high speeds, the shape of the strip leaving the mill is not good, causeing problems to rolling mills downstream. The project proposed here will integrate practical knowledge and numerical modeling of the strip shape of tandem cold mill at high speeds to optimise the quality of the strip exiting the cold mill, and enable the mill to operate at higher speeds than the current practice

冷连轧机的带材板形性能。冷轧机的带材形状受到机器条件和关键工艺变量的显着影响，但这些关键区域之间的相互关系尚不清楚，操作员依靠试错法来操作轧机。在高速情况下，离开轧机的带钢形状不佳，给下游轧机带来问题。这里提出的项目将整合实践知识和高速冷连轧机带材形状的数值模拟，以优化退出冷轧机的带材质量，并使轧机能够以比当前实践更高的速度运行