FACE - Novel Integrated Fuel Reformer-Aftertreatment System for Clean and Efficient Road Vehicles

FACE - 适用于清洁高效道路车辆的新型集成燃油重整器后处理系统

• 批准号: EP/P031226/1
• 负责人: Thanos Megaritis
• 金额: $ 68.38万
• 依托单位: Brunel University London
• 依托单位国家: 英国
• 项目类别: Research Grant
• 财政年份: 2017
• 资助国家: 英国
• 起止时间: 2017 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=EP%2FP031226%2F1
• 关键词: FACE; Novel; Integrated; Fuel; Reformer

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.

目前，GtR 中尚未提供所有资助研究的摘要。这通常是因为在提交提案时不需要摘要，但可能是因为它包含个人详细信息等敏感信息。

项目成果

Insights on the morphology of air-assisted breakup of urea-water-solution sprays for varying surface tension

关于不同表面张力的尿素水溶液喷雾的空气辅助破碎形态的见解

• DOI: 10.1016/j.ijmultiphaseflow.2020.103448
• 发表时间: 2020-09-05
• 期刊: International Journal of Multiphase Flow
• 影响因子: 3.8
• 作者: A. Kulkarni;T. Megaritis;L. Ganippa
• 通讯作者: L. Ganippa

Impact dynamics and morphology of urea-water-solution droplets impinging on a hot plate under urea-SCR relevant conditions: Influence of surface tension

尿素SCR相关条件下尿素水溶液液滴撞击热板的撞击动力学和形态：表面张力的影响

• DOI: 10.1016/j.fuel.2021.120671
• 发表时间: 2021-08-15
• 期刊: Fuel
• 影响因子: 7.4
• 作者: A. Kulkarni;T. Megaritis;L. Ganippa
• 通讯作者: L. Ganippa

Effects of the internal structures of monolith ceramic substrates on thermal and hydraulic properties: additive manufacturing, numerical modelling and experimental testing

整体陶瓷基板内部结构对热性能和水力性能的影响：增材制造、数值建模和实验测试

• DOI: 10.1007/s00170-020-06493-2
• 发表时间: 2020-12-28
• 期刊: The International Journal of Advanced Manufacturing Technology
• 作者: Nikolina Kovacev;Sheng Li;S. Zeraati;H. Hemida;A. Tsolakis;K. Essa
• 通讯作者: K. Essa

The synergy between substrate architecture of 3D-printed catalytic converters and hydrogen for low-temperature aftertreatment systems

3D 打印催化转化器的基底结构与低温后处理系统氢气之间的协同作用

• DOI: 10.1016/j.ces.2023.118490
• 发表时间: 2023-04-01
• 期刊: Chemical Engineering Science
• 影响因子: 4.7
• 作者: Nikolina Kovacev;O. Doustdar;Sheng Li;A. Tsolakis;J. Herreros;K. Essa
• 通讯作者: K. Essa

Effect of the preparation techniques of photopolymerizable ceramic slurry and printing parameters on the accuracy of 3D printed lattice structures

光聚合陶瓷浆料制备工艺及打印参数对3D打印晶格结构精度的影响

• DOI: 10.1016/j.jeurceramsoc.2021.08.052
• 发表时间: 2021-08-25
• 期刊: Journal of the European Ceramic Society
• 影响因子: 5.7
• 作者: Nikolina Kovacev;Sheng Li;K. Essa
• 通讯作者: K. Essa