Printable Hybrid Optoelectronic Materials and Devices

可印刷混合光电材料和器件

• 批准号: CRC-2017-00313
• 负责人: Cloutier, Sylvain
• 金额: $ 7.29万
• 依托单位: École de technologie supérieure
• 依托单位国家: 加拿大
• 项目类别: Canada Research Chairs
• 财政年份: 2019
• 资助国家: 加拿大
• 起止时间: 2019-01-01 至 2020-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=692786
• 关键词: Printable; Hybrid; Optoelectronic; Materials; Devices

The Industry 4.0 and the Internet of Things revolutions aim for fast and better-informed decisions based on complete and readily-acquired data. For medical, manufacturing or consumer electronics, better and cheaper sensors are paramount towards achieving this profound transformation. Recent years have seen an extraordinary push for better low-cost and printable optoelectronic materials and devices. However, fundamental challenges impede their integration into commercial-grade platforms.Our goal is to solidify an internationally-recognized program investigating the fundamental interrelations between the synthesis & processing, structural and physical properties of novel printable architectures to achieve high-performance low-cost optoelectronic devices fabricated using commercial-grade processing capabilities.

行业4.0和物联网革命旨在基于完整且易于获得的数据来快速，更有信息的决策。对于医疗，制造或消费电子产品，更便宜，更便宜的传感器对于实现这种深刻的转变至关重要。近年来，非凡的努力寻求更好的低成本和可打印的光电材料和设备。但是，基本挑战阻碍了它们整合到商业级平台中。我们的目标是巩固一项国际认可的计划，研究合成与加工，新型可打印体系结构的综合与加工，结构和物理性能之间的基本相互关系，以实现高表现的低成本光电质量。使用商业级处理能力制造的设备。