Assessment of Ultra-High-Speed motors potential for electric propulsion

评估超高速电机的电力推进潜力

• 批准号: 556316-2020
• 负责人: Picard, Mathieu
• 金额: $ 5.8万
• 依托单位: Université de Sherbrooke
• 依托单位国家: 加拿大
• 项目类别: Alliance Grants
• 财政年份: 2021
• 资助国家: 加拿大
• 起止时间: 2021-01-01 至 2022-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=722786
• 关键词: Assessment; Ultra; Speed; motors; potential

Electric propulsion has driven the development of more power-dense electric motor. However, the power density of direct-drive motor, directly coupled with tangential velocity, is limited by the area available behind the propeller. An approach to radically increasing power density is to use ultra-high-speed motors with a gearbox to decouple rotational speeds and achieve high tangential speeds. The project proposed here aims at evaluating the benefits of geared ultra-high-speed motors for electric propulsion. The first step is to carry iterative destructive testing of permanent rotor samples to understand and surpass the current tangential speed limits. The second step is to integrate the results in a multidisciplinary analysis and optimization tool to find the configuration that better exploit this gain in tangential speed to maximize power density and efficiency. The last step is to build and test an ultra-high-speed motor to demonstrate ultra-high tangential speed operation and validate the losses prediction at these frequencies. This project is the first step towards developing new technologies to overcome current power density limits that would give this project Canadian partners a competitive advantage over competitors in the emerging electric-VTOL market.

电力推进推动了功率密度更高的电动机的发展。然而，直接驱动电机的功率密度与切向速度直接耦合，受到螺旋桨后面可用面积的限制。从根本上提高功率密度的一种方法是使用带有变速箱的超高速电机来解耦转速并实现高切向速度。这里提出的项目旨在评估用于电力推进的齿轮超高速电机的优势。第一步是对永磁转子样品进行迭代破坏性测试，以了解并超越当前的切向速度限制。第二步是将结果集成到多学科分析和优化工具中，以找到更好地利用切向速度增益的配置，以最大限度地提高功率密度和效率。最后一步是构建和测试超高速电机，以演示超高切向速度运行并验证这些频率下的损耗预测。该项目是开发新技术以克服当前功率密度限制的第一步，这将使该项目加拿大合作伙伴在新兴电动垂直起降市场上比竞争对手更具竞争优势。