Extension of the process limits by integration of oscillation tool into an industry-oriented sheet-bulk metal forming process (T05)

通过将振荡工具集成到面向工业的板材散装金属成型工艺中来扩展工艺限制 (T05)

• 批准号: 417860324
• 金额: --
• 依托单位: Institut für Umformtechnik und Umformmaschinen (IFUM)
• 依托单位国家: 德国
• 项目类别: CRC/Transregios (Transfer Project)
• 财政年份: 2019
• 资助国家: 德国
• 起止时间: 2018-12-31 至 2021-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/417860324?language=en
• 关键词: Extension; process; limits; integration; oscillation

The aim of the project is to realise and investigate the transfer of the obtained results from the subproject A7 regarding the superimposed oscillation to the boundary conditions of an industry-oriented sheet bulk-metal forming process. The objective is to achieve an optimised material flow, increased component quality and low process times through a powerful oscillation superposition in a sheet metal forming process. At the same time, the influence of the new oscillating process from the TP A7 at frequencies of up to 600 Hz and amplitude of up to 60 μm is to be examined for the abstracted process. From the results obtained, a transfer approach to other SBMF processes is developed.

该项目的目的是实现并研究从子标子A7获得的结果转移到叠加的振荡到面向行业的边界条件上的叠加振荡。目的是通过在钣金形成过程中实现强大的振荡叠加来实现优化的材料流量，增加组件质量和低过程时间。同时，要在抽象过程中检查新的振荡过程从TP A7的频率高达600 Hz的频率和高达60μM的放大器的影响。从获得的结果中，开发了对其他SBMF过程的转移方法。