The Synthesis and Continuous Manufacture of Novel, High Performing Polymeric Lubricants for the Next Generation of Electric Transportation

用于下一代电动交通的新型高性能聚合物润滑剂的合成和连续制造

• 批准号: 2489089
• 金额: --
• 依托单位: University of Nottingham
• 依托单位国家: 英国
• 项目类别: Studentship
• 财政年份: 2024
• 资助国家: 英国
• 起止时间: 2024 至 无数据
• 项目状态: 未结题
• 来源: https://gtr.ukri.org/projects?ref=studentship-2489089
• 关键词: Synthesis; Continuous; Manufacture; Novel; Performing; Synthesis; Continuous; Manufacture; Novel; Performing

This PhD project is in collaboration with BP Castrol and will apply both chemistry and engineering to develop novel polymeric lubricants for electric transportation. Polyurea based lubricating greases have attracted much interest due to its excellent oxidative and thermal stability, good load bearing character and promising material compatibility with elastomers and paints. Currently, a single polyurea technology has been developed and synthesised at production scale at the BP facilities for the manufacture of such a grease. However, it is desired to further develop this technology and in particular, remove the use of toxic di-isocyanate as a core reagent. This project therefore aims to develop:- A series of isocyanate free polyurea polymers that have the desired properties to fit with the intended end use application.- Continuous manufacturing techniques to manufacture high performance polyurea lubricants. Specifically, microwave technology and reactive extrusion will be considered as new manufacturing options for polyurea based lubricating grease

该博士学位项目与BP Castrol合作，将应用化学和工程来开发新型的聚合物润滑剂进行电动运输。基于聚尿素的润滑油脂由于其出色的氧化和热稳定性，良好的负载轴承特性以及与弹性体和油漆的有前途的材料兼容，因此引起了极大的兴趣。目前，在BP设施的生产规模上已经开发并合成了单一的聚尿素技术，以生产这种油脂。但是，希望进一步开发这项技术，尤其是去除使用有毒二异氰酸酯作为核心试剂的使用。因此，该项目的目的是开发： - 一系列无异氰酸酯聚合物聚合物具有所需的特性，可与预期的最终使用应用相吻合。-连续制造技术来制造高性能多尿润滑剂。具体而言，微波技术和反应性挤出将被视为基于聚尿素的润滑油脂的新制造选择