Advanced nanostructured composite membranes for gas separations

用于气体分离的先进纳米结构复合膜

• 批准号: RGPIN-2014-05788
• 负责人: Feng, Xianshe
• 金额: $ 3.21万
• 依托单位: University of Waterloo
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2018
• 资助国家: 加拿大
• 起止时间: 2018-01-01 至 2019-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=650608
• 关键词: Advanced; nanostructured; composite; membranes; gas

Advanced technologies for gas separation have become increasingly important to Canadian industry because of its significance to petrochemical, energy and resource sectors; however, current solutions are limited for certain applications. The proposed research will pursue development of advanced composite membranes with tailored nanostructures to effect gas separations that are important to Canadian industries but difficult to carry out with traditional technologies. Specifically, this research aims at developing innovative composite membranes with tailored nanostructures for 1) olefin/paraffin separation (to replace or complement with traditional energy-intensive low temperature distillation), 2) nitrogen removal from natural gas for upgrading, and 3) CO2 separations from flue gas for greenhouse gas emission control where a high membrane permselectivity is needed for the process to be economically feasible. Olefin separation and natural gas denitrogenation are two most challenging operations in the gas industry, while flue gas separation is important for carbon capture and pollution abatement. They are all directly related to Canada's strategic development of innovative technologies in the petrochemical, resource and energy industries.**Membrane technologies have emerged as an energy efficient unit operation, but the current generation of membranes is not good enough for the aforementioned separations. It is proposed to tailor the membrane composition and nanostructure to enhance the membrane performance. In one approach, appropriate complexing agents will be incorporated into a polymeric base membrane to facilitate the permeation of a target component (e.g., olefin) by chemical interactions. The complexing agents will be embedded uniformly in the base polymer membrane to form nanostructured composite membranes. Silver ions and amine molecules will be chosen as the complexing agents for olefin and CO2 applications, respectively, to exploit the specific olefin-silver and CO2-amine interactions.**In another approach, block copolymers with micro-biphase separated microstructures comprising of soft segments and rigid segments will be used for N2/CH4 separation, which is truly a challenge in practice for denitrogenation of natural gas as other techniques (e.g., absorption, adsorption) are also inadequate. For this pair of gases, suitable complexing agents for chemical facilitation are lacking. However, in block copolymers, the soft segments contribute to a high permeability, while the rigid segments are expected to be discretive to the diffusion of gas molecules. Their molecular structures can be tailored by adjusting the two segments, and additives that have specific interactions with or molecular sieving effect for CH4 or N2 may also be incorporated into the membrane to form a mixed matrix nanocomposite, thereby enhancing the overall membrane selectivity for N2/CH4 separation. Many natural gas reserves in Canada are of sub-quality because of high nitrogen contents, and successful development of the membrane will have a significant economic impact to the industry.**The proposed research is highly original and innovative. Based on our preliminary success with such an innovative approach for olefin/paraffin separation, which is being exploited for commercial development by Canadian industry as a Canadian-owned potential "breakthrough" technology, this research will extend to include advanced membranes for CO2 separation and natural gas denitrogenation via appropriate nanostructuring of the membranes. Not only does this work directly address Canada's industrial needs for advanced membrane technologies, it will also contribute significantly to advancing knowledge and training of highly qualified personnel.

先进的气体分离技术对加拿大工业变得越来越重要，因为它对石化、能源和资源行业具有重要意义；然而，当前的解决方案仅限于某些应用。拟议的研究将致力于开发具有定制纳米结构的先进复合膜，以实现对加拿大工业很重要但难以用传统技术进行的气体分离。具体来说，本研究旨在开发具有定制纳米结构的创新复合膜，用于 1) 烯烃/石蜡分离（以取代或补充传统的能源密集型低温蒸馏），2) 从天然气中脱氮以进行升级，以及 3) 二氧化碳分离用于温室气体排放控制的烟道气，需要高膜渗透选择性才能使该过程在经济上可行。烯烃分离和天然气脱氮是天然气行业中最具挑战性的两个操作，而烟气分离对于碳捕获和污染减排至关重要。它们都与加拿大石化、资源和能源行业创新技术的战略发展直接相关。**膜技术已作为一种节能的单元操作而出现，但当前一代的膜对于上述分离来说还不够好。建议调整膜成分和纳米结构以增强膜性能。在一种方法中，将适当的络合剂掺入聚合物基膜中，以通过化学相互作用促进目标组分（例如烯烃）的渗透。络合剂将均匀地嵌入基础聚合物膜中，形成纳米结构复合膜。将分别选择银离子和胺分子作为烯烃和 CO2 应用的络合剂，以利用特定的烯烃-银和 CO2-胺相互作用。 **在另一种方法中，具有微双相分离微结构的嵌段共聚物由软质材料组成N2/CH4 分离将使用链段和刚性链段，这对天然气脱氮实践来说确实是一个挑战，因为其他技术（例如吸收、吸附）也不够充分。对于这对气体，缺乏适合化学促进的络合剂。然而，在嵌段共聚物中，软链段有助于高渗透性，而刚性链段预计对气体分子的扩散具有离散性。它们的分子结构可以通过调整两个片段来定制，并且还可以将与CH4或N2具有特定相互作用或分子筛分作用的添加剂掺入膜中，形成混合基质纳米复合材料，从而增强膜对N2/N2的整体选择性。 CH4 分离。加拿大的许多天然气储量由于氮含量高而质量不合格，该膜的成功开发将对行业产生重大的经济影响。**拟议的研究具有高度的原创性和创新性。基于我们在烯烃/石蜡分离方面的创新方法的初步成功，该方法正在被加拿大工业界作为加拿大拥有的潜在“突破性”技术进行商业开发，这项研究将扩展到包括用于二氧化碳分离和天然产物的先进膜。通过适当的膜纳米结构进行气体脱氮。这项工作不仅直接满足加拿大工业对先进膜技术的需求，还将为提高知识水平和培训高素质人才做出重大贡献。