Controlled Pultrusion Process including in-situ quality-control

受控拉挤工艺，包括现场质量控制

• 批准号: 289466965
• 负责人: Professor Dr.-Ing. Michael Sinapius
• 金额: --
• 依托单位: Institut für Mechanik und Adaptronik
• 依托单位国家: 德国
• 项目类别: Research Grants
• 财政年份: 2016
• 资助国家: 德国
• 起止时间: 2015-12-31 至 2021-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/289466965?language=en
• 关键词: Controlled; Pultrusion; Process; including; situ

Pultrusion, as a continuous production process of composite profils becomes more important because of the growing areas of application of composite materials. To minimize the rejection rate in the pultrusion process at high process speed, both the position of the mandrel and the cure of the resin must be measured during the whole process and if necessary regulated. In the research project, an inline sensor technology which allows continuous monitoring of the whole process is going to be developed. The production speed of the process can thus be optimized maintaining an excellent precision and material variant levels.

由于复合材料的应用不断增长，因此，随着复合胶卷的连续生产过程变得越来越重要。为了在高过程速度下最大程度地减少裁缝过程中的排斥率，必须在整个过程中和必要时测量树脂的位置和树脂的治疗。在研究项目中，将开发允许对整个过程进行持续监视的内联传感器技术。因此，可以优化该过程的生产速度，以保持出色的精度和材料变体水平。