PAk 1: Fe-Pd-X Thin Film-Polymer Composites for Sensor Applications - Combinatorial Development of New Ferromagnetic Shape Memory Thin Films with Improved Intrinsic Properties

PAk 1：用于传感器应用的 Fe-Pd-X 薄膜聚合物复合材料 - 具有改进的固有性能的新型铁磁形状记忆薄膜的组合开发

• 批准号: 28258879
• 负责人: Professor Dr.-Ing. Alfred Ludwig
• 金额: --
• 依托单位: Lehrstuhl Neue Materialien und Grenzflächen (MDI)
• 依托单位国家: 德国
• 项目类别: Priority Programmes
• 财政年份: 2006
• 资助国家: 德国
• 起止时间: 2005-12-31 至 2013-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/28258879?language=en
• 关键词: PAk; Fe; Pd; Thin; Film

The project is part of a package proposal aiming at new Fe-Pd based ferromagnetic shape memory alloys for sensor applications. The aim of this project is to identify new FSMA with improved intrinsic properties, i.e. both martensitic and ferromagnetic transition temperatures well above room temperature as well as a high magnetic anisotropy and saturation magnetization. The search will be based on the Fe-Pd system with additions of further elements. The strategy to find new alloys in the Fe-Pd-X(-Y) system will be based on the combinatorial materials science approach, i.e. deposition of thin film materials libraries and high-throughput characterization of these by automated screening technologies. An automated measurement of temperature-dependent magneto-electronic properties for the identification of phase transitions and micro-machined cantilever arrays for the parallel optical detection of the shapememory effect and magnetostrictive effects will be used. The compositional dependencies of martensitic and ferromagnetic phase transformation temperatures, as well as magnetoresistive effects in the Fe-Pd-X(-Y) thin films will be studied in detail in order to optimize film properties. Finally, it will be investigated if field-induced strain can be detected in the newly developed films by using microsystem technology.

该项目是针对基于FE-PD的新型铁磁形状存储合金的包装提案的一部分，用于传感器应用。该项目的目的是确定具有改进的内在特性的新FSMA，即马氏体和铁磁过渡温度远高于室温，以及高磁各向异性和饱和磁化。搜索将基于FE-PD系统，并增加了更多元素。在Fe-PD-X（-y）系统中找到新合金的策略将基于组合材料科学方法，即薄膜材料库的沉积以及通过自动筛选技术对这些材料的沉积和高通量表征。用于鉴定相变和微型悬臂阵列的温度依赖性磁电特性的自动测量，用于平行光学检测以及磁膜效应。将详细研究马氏体和铁磁相变温的组成依赖性，以及Fe-PD-X（-y）薄膜中的磁化效果，以优化膜性能。最后，如果使用微系统技术可以在新开发的薄膜中检测到现场诱导的菌株，则将研究。