stabilization of microsieves by application of a supporting structure via ink-jet printing

通过喷墨印刷应用支撑结构来稳定微筛

• 批准号: 252340973
• 负责人: Professor Dr. Reinhard Baumann
• 金额: --
• 依托单位: Institut für Print- und Medientechnik
• 依托单位国家: 德国
• 项目类别: Research Grants
• 财政年份: 2014
• 资助国家: 德国
• 起止时间: 2013-12-31 至 2017-12-31
• 项目状态: 已结题
• 来源: https://gepris.dfg.de/gepris/projekt/252340973?language=en
• 关键词: stabilization; microsieves; application; supporting; structure

Currently we are able to prepare hierarchically structured microsieves by combining float-casting (to produce membranes with fine pores) and ink-jet printing (to add a mechanically stable supporting structure) on a solid support in small areas.Goal of the project is to print directly onto microsieves still floating on a water surface and to increase the printed region to areas up to 200 cm².

目前，我们能够通过在小区域的固体支撑物上结合浮铸（以生产具有细孔的膜）和喷墨印刷（以添加机械稳定的支撑结构）来制备分层结构的微筛。该项目的目标是直接打印到仍漂浮在水面上的微筛上，并将打印区域扩大到 200 cm²。