Development of sliding materials prepared by iron sand, silica sand, etc. for native liquid

铁砂、硅砂等原液滑动材料的开发

• 批准号: 23560177
• 负责人: MURAKAMI Takashi
• 金额: $ 3.24万
• 依托单位: National Institute of Advanced Industrial Science and Technology
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 2011
• 资助国家: 日本
• 起止时间: 2011 至 2013
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-23560177/
• 关键词: トライボロジー; 表面・界面物性; 金属物性; 環境対応; 材料加工・処理

The friction and wear properties of Fe-Si alloys were examined in ethanol, and it was found that the Fe-Si alloys containing Si content higher than 66.7 atomic percent exhibited low friction coefficients. It was also found that the friction coefficients of the alpha-FeSi2 alloys could be reduced by adding 5vol% graphite. According to the XPS analysis, it is considered that the low friction of the Fe-Si alloys was due to the formations of low friction gel-type compounds, which was formed by the reaction of SiO2 with ethanol, and low friction iron oxides. Besides, it was found that borochromized specimens, not siliconized specimens, exhibited low friction coefficients in ethanol.

在乙醇中检查了Fe-SI合金的摩擦和磨损特性，发现含有高于66.7原子百分比的Si含量的Fe-SI合金表现出低摩擦系数。还发现，通过添加5Vol％石墨可以降低α-FESI2合金的摩擦系数。根据XPS分析，认为Fe-SI合金的低摩擦源是由于低摩擦凝胶型化合物的形成，该化合物是由SiO2与乙醇和低摩擦铁氧化物的反应形成的。此外，还发现硼化物的标本（而不是硅化标本）在乙醇中表现出低摩擦系数。

项目成果

Al、B、Cr、Si拡散処理した片状黒鉛鋳鉄の摩擦・摩耗特性

Al、B、Cr、Si扩散处理片状石墨铸铁的摩擦磨损性能

• 发表时间: 2012
• 作者: 村上敬;松崎邦男;五味泰久;佐々木信也;乾晴行
• 通讯作者: 乾晴行

Microstructure of gray cast iron substrates coated by pack cementation methods

包渗法涂覆灰口铸铁基体的显微组织

• 发表时间: 2012
• 作者: T. Murakami;K. Matsuzaki;Y. Gomi;S. Sasaki
• 通讯作者: S. Sasaki

Friction and wear properties of alpha-FeSi_2-Si alloy, ReSi_<1.8> and MoSi_2 in ethyl alcohol

α-FeSi_2-Si合金、ReSi_<1.8>和MoSi_2在乙醇中的摩擦磨损性能

• DOI: 10.1016/j.triboint.2013.09.002
• 发表时间: 2014
• 期刊: Tribology International
• 影响因子: 6.2
• 作者: T. Murakami;H. Mano;Y. Hibi;K. Matsuzaki;H. Inui
• 通讯作者: H. Inui

Microstructure and tribological properties of gray cast iron specimens coated by aluminizing, boronizing, chromizing and siliconizing

渗铝、渗硼、渗铬、渗硅灰铸铁试样的显微组织和摩擦学性能

• DOI: 10.1557/opl.2012.1726
• 发表时间: 2013
• 期刊: 2012 MRS Fall Meeting Proceedings
• 作者: T. Murakami;K. Matsuzaki;Y. Gomi;S. Sasaki;H. Inui
• 通讯作者: H. Inui

水潤滑用低摩擦・低摩耗しゅう動面及びそのしゅう動面用材料の製造方法

用于水润滑的低摩擦/低磨损滑动表面以及用于生产滑动表面材料的方法

• 发表时间: 2013